Answer:
To connect a hopper to a chest, first make sure the hopper is placed on the ground directly in front of the chest. Then, facing the chest, hold down the “use” key (thekey that’s used to open chests) and right-click on the top of the hopper.
A little purple arrow should now appear above the hopper. Finally, release both buttons and drag the purple arrow towards the chest. The connection will be made once you’ve released the mouse button and are pointing at the chest.
Why won’t my hopper connect to my chest?
Answer:
There are a few things that could be causing this issue. First, check to make sure that your hopper is properly seated on the chest. If it is not, it will not connect. Next, make sure that the electronic chip on the back of the hopper is facing the correct direction. The chip should be lined up with the arrow on the connector piece on the chest. If it is not, it will not connect.
Finally, try pressing and holding down both buttons on the front of the chest for 10 seconds to reset the connection. If none of these solutions work, please contact our customer service team for assistance.
Why won’t my hopper connect to my chest bedrock?
Answer:
There are a few potential reasons why your hopper might not be connecting to your chest bedrock. One possibility is that the two blocks are simply placed in the wrong positions. Make sure that the hopper is facing the correct way – it should be facing the chest bedrock so that the items can easily transfer between them.
Another possibility is that there might be something blocking the transfer of items between the two blocks. If there’s something obstructing their connection, you’ll likely see a message telling you as much. In this case, you’ll need to remove whatever is blocking them and try again.
Finally, it’s also possible that your chest bedrock has been set to “private” mode.
How do you get items from Hopper Minecart to chest?
Answer:
There are a few different ways to get items from the Hopper Minecart to the chest. One way is to use redstone wiring to create a circuit that will automatically transfer the items from the minecart to the chest. Another way is to use an item dispenser to dispense the items into the chest.
Why won’t my hopper feed into my furnace?
Answer:
There are a few reasons this might be happening:
- The most likely reason is that your hopper is not set up correctly. Make sure you have the right size hopper for your furnace and that it is positioned correctly above the opening.
- Another possibility is that your furnace is not set to the correct temperature. If your furnace is too cold, the hopper will not work properly.
- Finally, it is also possible that there is something blocking the hopper from feeding into the furnace, such as a blockage in the chute or a piece of debris in the way. If this is the case, clear out the obstruction and try again.
