how to reset osaki massage chair

Share on:

To reset your Osaki massage chair, first, unplug it from the wall.

Next, turn it over so that the chair is facing downwards. Take out the four screws on the bottom of the chair using a Phillips head screwdriver.

Once the screws are removed, you can lift off the cover and access the inside of the chair.

Locate the small black reset button at the top of the circuit board and press it with a pen or paper clip until you hear a beep.

Replace the cover and screws, then plug in your massage chair to power up. The machine will now be in default settings mode.

To customize your settings, go to Menu > Settings > Chair Type > and choose your preferences.

Related
Why facebook disabled my account for no reason

How do you reset a massage chair?

If you need to reset your massage chair, there are a few things you can do.

First, check the power cord to make sure it is plugged in properly. If it is, then unplug the power cord and wait a minute before plugging it back in.

This will often reset the chair and get it working again.

If unplugging and replugging the power cord does not work, then you may need to reset the chair itself. To do this, locate the reset button on the chair.

It is usually located either on the bottom of the chair or on the side near the control panel. Once you have found the reset button, press and hold it for a few seconds.

Source: https://vyralx.com/how-to-reset-a-massage-chair/

Why is my massage chair not working?

Answer: It’s possible that your massage chair is not working because the power cord is unplugged.

It’s also possible that your massage chair is not working because the motor has burned out. If this is the case, then the massage chair will need to be repaired or replaced.

Finally, it’s possible that your massage chair is not working because there is something blocking the transmission of sound waves from the motor to the cushion. If this is the case, then you may need to clean or replace the cushion.

Source: https://www.easymassagechair.com/blog/what-can-break-in-a-massage-chair-and-how-to-deal-with-it.html#:~:text=When%20your%20massage%20chair%20stops,may%20be%20electrical%20in%20nature.

How do you sync the Osaki massage chair?

There are a few ways to sync an Osaki massage chair. One way is to use the remote control that came with your massage chair.

To do this, hold down the Mode button and then press either the Up or Down arrow button to select “Sync.”

Once you’ve selected “Sync,” press the Enter button. Your massage chair will now begin syncing with the remote control.

Another way to sync your Osaki massage chair is by using the Sync Cable. To do this, first make sure that both your massage chair and computer are turned on. Then, connect the Sync Cable from your computer to the jack on your massage chair labeled “Computer.”

How do you start an Osaki massage chair?

Most Osaki massage chairs have a removable back panel that allows access to the internal workings of the chair.

Once the back panel is removed, you can connect the included power cord to the chair and plug it into an outlet. You can then turn on the chair by pressing the power button.

The chair will then start automatically in full-body scan mode. For more detailed instructions, consult your owner’s manual.

At MTS, we believe that technology should be simple. We're a website dedicated to answering all your tech-related questions, with a team of IT industry experts who are here to make sure you understand everything from the basics to the most advanced concepts.